
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X40-20S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere from 20 to 40 mm without swapping shims or parts, while the retract motion remains full length. This on-site flexibility drastically reduces commissioning time during tooling changeovers.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel shock is handled by a fixed NBR bumper, and the included -S piston magnet supports AirTAC reed or electronic switches for precise position feedback.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop for different carton depths on the production line, relying on the fixed NBR bumper to absorb the impact of repetitive high-speed folding motions.
Selecting this bore involves balancing your force requirements and spatial limits.
It is ideal for setups requiring on-site stroke tuning between 20 and 40 mm. The unit features a PT1/4 port, a 20 mm rod, and female M10x1.5 rod-end threads. Because the -S magnet is present, you can install solid-state or reed sensors. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the stroke end. Use an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder uses a PT1/4 air port.
The M16x1.5 adjuster screw mechanically shortens the extend stroke from the 40 mm maximum down to 20 mm without altering the output force. The -S suffix indicates a built-in piston magnet designed to trigger AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.