
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X40-20SB is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine between 20 and 40 mm. The short riveted body drastically reduces axial mounting depth where a round-body or profile cylinder will not fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 piston rod thread. Deceleration at the stroke terminus relies on a fixed NBR bumper, which absorbs end shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rotate the M16x1.5 adjuster screw to shift the male M18x1.5 rod endpoint instantly when swapping fixture heights on a high-mix assembly line.
Use the 20 mm external window to test clamping depth on new workpieces, finding the exact contact point before locking down the stop.
If you need less force, the adjacent SDAJ50 provides 981.7 N at 0.5 MPa; stepping up to the SDAJ80 yields 2513.3 N. Choose this 63 mm bore with the 20 mm adjustment window for lines requiring frequent on-site stroke tuning without part changes. Confirm the PT1/4 port, the -S magnet for sensing, and the -B male M18x1.5 rod end. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For a held load, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates at 30-500 mm/s over a 0.15-1.0 MPa pressure range.
The external M16x1.5 screw shortens the extend stop by up to 20 mm, giving a usable extend range of 20-40 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.