
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X45-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 35 and 45 mm without swapping shims or parts, while the retract motion remains full length.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units cannot fit. The built-in piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position sensing. Deceleration is handled by a fixed NBR bumper at each end, which absorbs end-shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 35-45 mm extend stop during press-fit changeovers to accommodate subtle part height variations without reprogramming the motion controller.
When sizing this 63 mm bore, evaluate your thrust requirements both ways.
Choose this specific configuration when your fixture requires exact on-site stroke tuning within the 35-45 mm window. Confirm your setup needs the PT1/4 air port, the 20 mm piston rod, and the built-in magnet (-S). Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 10 mm, giving a usable range of 35-45 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.