
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The SDAJ63X45-10SB is a compact double-acting double-rod cylinder featuring a built-in magnet and a male-thread piston rod. An external M16x1.5 adjuster screw lets you dial the extend stop directly on the machine between 35 and 45 mm, eliminating the need for shims or part swaps during fine-tuning.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Equipped with the -S magnet, the body sensor grooves accept AirTAC reed or electronic solid-state switches for position confirmation.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 35-45 mm extend stop on the fly to accommodate raw material thickness variations without reprogramming the motion controller.
Choose this model if your fixture changeovers require on-site stroke tuning within the 35-45 mm window. Confirm your bore, 45 mm maximum stroke, 10 mm adjustment range, PT1/4 port, -S magnet, and -B male M18x1.5 rod thread meet the application requirements. Remember that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M16x1.5 screw shortens the extend end position by up to 10 mm, giving a usable range of 35-45 mm; retract remains full stroke. The built-in magnet (-S) allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for precise position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.