verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke45 mm
  • Adjustable range25–45 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$86.04 $93.54Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB

The AirTAC SDAJ63X45-20SB is a double-acting compact cylinder featuring an on-site adjustable extend stop. Turning the external R (M16x1.5) screw lets you dial the outward stroke anywhere between 25 and 45 mm, eliminating the need for shims or part swaps during machine commissioning.

This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, alongside a male-threaded M18x1.5 piston rod (-B) for secure load attachment. The short riveted body significantly reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke lock.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke45 mm
Adjustable range25 – 45 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×45Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB Is Used

precision_manufacturing

Press Fit Calibration

Dial the extend stop from 25 to 45 mm to set precise insertion depths for bearing presses without machining new spacers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB the Right Cylinder?

Stepping down to an SDAJ50 yields 981.7 N, whereas stepping up to an SDAJ80 provides 2513.3 N. Choose this specific unit if your fixture requires fine-tuning the outward reach during changeovers.

Confirm the 63 mm bore, 45 mm maximum stroke, 20 mm adjustment window, and PT1/4 port match your pneumatic supply. The male M18x1.5 rod end requires a matching female fixture, and the -S magnet enables position sensing. Remember that a plain compact cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB FAQ

At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.

The M16x1.5 adjuster screw mechanically shortens the extend stroke by up to 20 mm, giving a usable range of 25 to 45 mm without changing output force. The built-in -S magnet allows tracking of piston position using AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-20SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X45-20SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.