verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke45 mm
  • Adjustable range15–45 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$86.04 $93.54Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB

The AirTAC SDAJ63X45-30SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 15 and 45 mm without swapping shims or components.

This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches, plus a male M18x1.5 threaded rod end (-B) for secure mechanical attachments. The short riveted body significantly reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke45 mm
Adjustable range15 – 45 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×45Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB Is Used

vertical_align_center

Vertical Lift Dampening

Lifting a 75 kg fixture in a materials handling gantry.

sync_alt

Changeover Positioning

Adjusting a diverter arm on a packaging line that runs multiple carton sizes. The M16x1.5 screw sets the extend endpoint on the fly without changing hardware.

precision_manufacturing

Press Fit Tuning

Trial positioning a bearing press head. The male M18x1.5 rod mounts the tooling, and the 30 mm window allows precise depth tweaking during initial commissioning.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB the Right Cylinder?

If your application requires less force, the neighbouring SDAJ50 provides 981.7 N at 0.5 MPa. Conversely, for heavier demands, the SDAJ80 steps up to 2513.3 N at 0.5 MPa.

Choose this specific configuration when you need frequent on-machine stroke tuning during setup or changeovers. Confirm the 63 mm bore, 45 mm maximum stroke, 30 mm adjustment window, PT1/4 air port, male M18x1.5 rod thread, and the integrated magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB FAQ

At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.

The M16x1.5 external screw shortens the extend endpoint by up to 30 mm, giving a usable outward range of 15 to 45 mm. Retract remains full stroke. The -S code means a built-in magnet is installed, allowing you to fit AirTAC reed or electronic solid-state switches directly into the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-30SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X45-30SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.