
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X50-20S is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine. You can tune the outward stroke anywhere between 30 and 50 mm without swapping shims or parts, while the retract motion remains full length.
Its short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. The built-in piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position detection. End shock is managed by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 50 mm to secure raw castings of varying widths against a machining stop without fabricating custom spacers.
When sizing this 63 mm bore, evaluate both neighbours using 0.5 MPa push figures. Stepping down to the SDAJ50 provides 981.7 N, whereas moving up to the SDAJ80 yields 2513.3 N.
Choose this unit if your fixture requires frequent on-site stroke tuning between 30 and 50 mm to accommodate part variance. It features a PT1/4 port, a 20 mm piston rod, and female M10x1.5 rod-end threads. The S suffix confirms the internal magnet for switch sensing. Remember that a plain cylinder does not hold position on air loss or valve centring; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum output is 318 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend end position from the 50 mm maximum down to 30 mm without altering force. The S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.