
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-50B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X50-50B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. An M16x1.5 screw lets you dial the outward stroke down by up to 50 mm directly at the machine, yielding a usable extension range of 0 to 50 mm without swapping shims or components.
Designed to save axial mounting depth, the short riveted body fits where round-body alternatives will not. The unit relies on a fixed NBR bumper at each end to decelerate the piston, which is not an adjustable air cushion. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning magnetic switches cannot be fitted unless you specify the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 50 mm |
| Adjustable range | 0 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-50 mm extend stop during machine commissioning to set forming tools without machining custom spacers.
Quickly rotate the M16x1.5 adjuster to shorten the stroke when switching to a different package size on a packaging line.
Set a precise lower mechanical stop for lifts handling up to 79.4 kg, using the fixed NBR bumper to absorb the final impact energy.
Choose this male-rod (M18x1.5) configuration for tooling that requires a threaded attachment point, ensuring you avoid side load to prevent premature seal wear. The PT1/4 port supplies air at speeds of 30-500 mm/s. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa this 63 mm bore cylinder pushes with 1558.6 N and pulls with 1401.5 N. At 0.7 MPa push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. The air port is PT1/4.
The M16x1.5 screw mechanically shortens the extend endpoint from the nominal 50 mm down to 0 mm. It sets the stop position only and does not alter force or lock the piston mid-stroke. The cylinder cannot hold a load on air loss; use an external rod lock for suspension requirements.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.