
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-10S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down by up to 10 mm directly on the machine, yielding a usable extend range of 45-55 mm without swapping shims or parts.
Its short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit, accepting standard AirTAC compact-cylinder accessories. The bore-fixed PT1/4 port and 20 mm piston rod handle substantial loads, while the built-in magnet (-S) enables tracking via a reed or electronic switch. End shock is managed by a fixed NBR bumper that decelerates the stroke end, which is not an adjustable air cushion or a lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the forward stop on-site for rapid product changeovers, using the 10 mm window to hit exact trial positions before locking the setting.
When sizing this 63 mm bore, evaluate both neighbouring options.
Operators needing on-site stroke tuning for trial positioning will benefit from the 45-55 mm adjust window. Confirm the 63 mm bore, 55 mm stroke, 10 mm window, PT1/4 port, female M10x1.5 rod thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold its load on air loss or when a valve is centred; the piston drifts and the bumper only decelerates near the end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The R (M16x1.5) screw shortens the extend stop by up to 10 mm, giving a 45-55 mm range; it sets the stop position and does not change force. The -S code denotes a built-in piston magnet for AirTAC reed or electronic switches, operating from -20 to +70 C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.