verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke55 mm
  • Adjustable range45–55 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$91.16 $98.66Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB

The AirTAC SDAJ63X55-10SB is a double-acting compact cylinder featuring a male-thread piston rod and a built-in magnet. An external M16x1.5 adjuster screw lets you dial the extend end-position anywhere between 45 and 55 mm directly on the machine, eliminating the need for shims or part swaps.

Its short riveted body significantly reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end, meaning it is not an adjustable air cushion. Equipped with a PT1/4 port and a 20 mm piston rod, this configuration is built for tight spaces requiring precise extend tuning.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke55 mm
Adjustable range45 – 55 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×55Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB Is Used

precision_manufacturing

Press Fit Dial-In

Perfect for assembly stations needing exact insert depth. Turn the M16x1.5 screw to fine-tune the 45-55 mm extend stop during initial setup or tooling changeovers.

vertical_align_center

Vertical Lift Stops

Adjust the end position on the fly to accommodate varying package heights without swapping cylinders.

package_2

Carton Forming Arms

The male M18x1.5 rod secures forming blades. The compact riveted body saves depth on tight conveyor frames while the bumper absorbs end-of-stroke shock.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB the Right Cylinder?

When sizing this 63 mm bore, evaluate your force requirements bidirectionally.

This specific build includes the -S magnet for AirTAC reed or electronic switches and the -B male M18x1.5 rod thread. It is ideal for setups needing on-site stroke tuning within the 10 mm window. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB FAQ

At 0.5 MPa, push is 1558.6 N and pull is 1401.5 N. At 0.7 MPa, push is 2182.1 N and pull is 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.

The external screw shortens the extend stroke by up to 10 mm, giving a usable range of 45-55 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X55-10SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.