
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-20S is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw that dials the extend stop directly on your equipment. You can set the outward stroke anywhere from 35 to 55 mm without swapping shims or components, while the retract motion remains full length.
Its short riveted body drastically reduces axial mounting depth, fitting into tight machine frames where larger profile cylinders cannot. The unit relies on a fixed NBR bumper to absorb end-of-travel shock rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches mounted directly into the body sensor grooves for precise position confirmation.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly when switching carton sizes, allowing the 20 mm window to accommodate different flap depths without changing tooling.
Choose this specific model if your fixture design requires on-site stroke tuning to perfect a pressing or clamping distance.
Confirm the bore size, 55 mm maximum stroke, and 20 mm adjustment window match your spatial envelope. The air port is PT1/4, and the piston rod measures 20 mm with a female M10x1.5 rod-end thread. The -S suffix ensures you have the magnet required for switch sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end and the R screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
The external M16x1.5 R-thread screw mechanically shortens the extend stop by up to 20 mm, yielding a usable outward range of 35 to 55 mm without altering the output force. The included -S magnet works with AirTAC reed or electronic switches in the body grooves for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.