
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-20SB is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. Turning this R thread lets you dial the extend stop down by up to 20 mm, yielding a usable forward range of 35 to 55 mm directly on the machine without swapping shims or parts.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M18x1.5 piston rod end (-B) instead of the default female thread. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 35-55 mm extend stop on the M16x1.5 screw during setup to perfect bearing insertion force without remachining stops.
Set the precise bottoming depth for a bending fixture, relying on the fixed NBR bumper to absorb the 79.4 kg vertical lift impact.
Choose this specific model when your fixture requires on-site stroke tuning to perfect a press or clamping distance.
Confirm the 63 mm bore, 55 mm maximum stroke, 20 mm adjust window, and PT1/4 port. The -S magnet enables position sensing via reed or solid-state switches, while the -B code denotes the male M18x1.5 rod thread. Note that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa this 63 mm bore cylinder pushes 1558.6 N and pulls 1401.5 N. At 0.7 MPa it pushes 2182.1 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The external screw shortens the extend stroke by up to 20 mm, giving a 35-55 mm range. The -S code means a built-in magnet is present for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.