
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-75S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-75S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 0 to 55 mm directly on your machine. Retract travel remains full length.
Its short riveted body drastically reduces axial mounting depth compared to conventional round-body units, fitting into tight machine frames. The unit relies on a fixed NBR bumper to absorb end-of-stroke shock rather than an adjustable air cushion, and the included -S piston magnet supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 0 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-55 mm extend position for varying raw casting thicknesses on a milling line without swapping out actuators, leveraging the 1558.6 N clamping force at 0.5 MPa.
Adjust the extend stop on the fly to match different box heights while maintaining consistent downward pressure, utilizing the compact riveted body to fit within tight sealing head clearances.
Fine-tune the rod extension for multi-level pallet stacking operations, using the M16x1.5 adjuster screw to set precise mechanical stops for each product layer changeover.
Choose this specific model if your fixture requires frequent on-site extend tuning across the 0 to 55 mm window.
Confirm the 63 mm bore, 55 mm maximum stroke, 75 mm adjustment window, PT1/4 air port, built-in magnet (S), and female M10x1.5 rod-end thread meet your spatial and plumbing constraints. Note that a plain cylinder does not hold position or load when air is lost or the directional valve is centred; the fixed NBR bumper only decelerates near the stroke end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external M16x1.5 R screw shortens the extend stroke by up to 75 mm, allowing the rod end to be set anywhere from 0 to 55 mm; retract travel remains full. The -S suffix denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches for end-of-stroke sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.