
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-10SB is a double-acting compact cylinder featuring a 63mm bore and an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke from 50 to 60 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This thin riveted-body design saves valuable axial mounting depth where larger profile or round-body units will not fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, and operates efficiently between 30 and 500 mm/s. Equipped with a male M18x1.5 piston rod thread and a built-in magnet, it supports AirTAC reed or electronic switches for precise position confirmation.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 50-60 mm extend stop during tooling changeovers to clamp raw castings securely without swapping out entire actuator bodies.
Fine-tune the male-thread rod extension on the fly to accommodate varying box heights, ensuring precise folding pressure for each format.
When sizing this model, evaluate your force requirements bidirectionally. This SDAJ63X60-10SB bridges that gap, delivering a theoretical maximum of 318 kgf at 1.0 MPa.
Choose this specific configuration if your fixture requires on-site extend tuning within the 50-60 mm window. It carries the -S magnet for solid-state or reed sensing and the -B code for a male M18x1.5 rod end. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63mm bore model uses a PT1/4 air port.
The external R (M16x1.5) screw shortens the extend end position by up to 10 mm, giving a usable forward range of 50-60 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while the screw acts only as a mechanical stop and does not lock the mid-stroke position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.