
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-30SB is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend stroke on-site anywhere between 30 mm and 60 mm without swapping shims or parts. This on-machine tuning drastically simplifies commissioning and tooling changeovers.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. This specific unit includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 piston rod thread.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm on the machine to accommodate different jig heights without fabricating new spacers.
Fine-tune the extend endpoint during prototype runs to find the exact contact point before locking down the sequence.
This configuration is ideal for operators needing frequent stroke tuning during setup-heavy production runs. Remember that a plain cylinder does not hold its load on air loss or valve centering; the fixed NBR bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Verify your bore, 60 mm max stroke, 30 mm window, PT1/4 port, -S magnet, and -B male rod thread before ordering.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa, push force is 1558.6 N and pull is 1401.5 N. At 0.7 MPa, push is 2182.1 N and pull is 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 R screw shortens the extend stroke by up to 30 mm, giving a usable 30-60 mm range; retract remains full. The -S option adds a piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.