
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-50S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-50S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 10 and 60 mm directly on the machine, completely avoiding shims or part swaps.
Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this bumper is not an adjustable air cushion, nor does the mechanical stop serve as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 60 mm via the M16x1.5 screw to accommodate multiple part lengths on a single fixture without machining new spacers.
Choose this specific unit if your fixture requires frequent changeovers or trial positioning within the 10-60 mm forward travel window.
Confirm the 63 mm bore, 60 mm maximum stroke, 50 mm adjust window, PT1/4 port, and the female M10x1.5 rod-end thread suit your mounting interface. The -S code ensures switch readiness, but remember a plain cylinder drifts if air is lost or the valve centres. For load holding without live pressure, install an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates near the end of travel.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stop by up to 50 mm, giving a usable forward range of 10-60 mm without changing force. The -S code denotes a built-in piston magnet for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.