
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-50SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-50SB is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the rod extension anywhere from 10 to 60 mm without swapping shims or parts, drastically simplifying changeovers.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, alongside a male M18x1.5 threaded rod end (-B) for secure mounting. The short riveted body saves valuable axial depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adapt folding arms on the fly for different carton heights using the M16x1.5 adjuster screw, ensuring precise mechanical stops across rapid product changeovers.
Choose this unit if your fixture requires frequent trial positioning or exact extend depth tuning via the 10-60 mm window.
Confirm the 63 mm bore, 60 mm maximum stroke, 50 mm adjustment window, and PT1/4 port suit your pneumatic layout. The male M18x1.5 rod thread and integrated magnet are specified here. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The M16x1.5 screw limits the extend stroke between 10 and 60 mm without altering the output force. The included -S magnet enables position sensing with AirTAC reed or electronic switches, while the fixed NBR bumper handles end-of-stroke shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.