
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-75S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-75S is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend position anywhere from 0 to 60 mm directly on the machine, avoiding part swaps.
Its short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit. The unit includes a fixed NBR bumper to decelerate the stroke end, operating at speeds of 30-500 mm/s. Equipped with a built-in magnet (-S), it supports AirTAC reed or electronic switches for precise end-position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 0 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 60 mm via the M16x1.5 screw to reposition tooling quickly during product changeovers without fabricating new spacers.
Choose this 63 mm bore if your application requires that intermediate force threshold.
This model is ideal for setups requiring frequent on-site stroke tuning or trial positioning. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts, and the fixed bumper only decelerates near the end. For a held load, install an external rod lock or a pilot-operated check valve. Configuration confirmed: 63 mm bore, 60 mm stroke, 75 mm window, PT1/4 port, -S magnet, female M10x1.5 rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, push is 2182.1 N and pull is 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The R (M16x1.5) adjuster screw shortens the extend stop by up to 75 mm, allowing a usable extend range of 0-60 mm without changing the force output. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.