verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke65 mm
  • Adjustable range45–65 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$95.81 $103.31Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S

The AirTAC SDAJ63X65-20S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that lets you dial the extend stop anywhere between 45 and 65 mm directly on the machine. Retract travel stays at the full 65 mm length.

Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit, while the integrated piston magnet supports AirTAC reed or electronic solid-state switches for end-position sensing. End shock is managed by a fixed NBR bumper, which decelerates the piston near the stroke end but is not an adjustable air cushion.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke65 mm
Adjustable range45 – 65 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×65Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S Is Used

precision_manufacturing

Machining Clamp Tuning

Dial the extend stop from 45 to 65 mm to clamp varying raw casting widths on a milling line without machining custom spacers.

packaging

Carton Flap Folding

Adjust the push rod end-point on the fly to fold different carton depths accurately during rapid format changeovers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S the Right Cylinder?

Choose this specific configuration if your fixture requires on-site stroke tuning to accommodate part variance.

Confirm the 65 mm maximum stroke, 20 mm adjustment window, PT1/4 port, and the built-in magnet (S option) for your sensing requirements. The female M10x1.5 rod-end thread handles the load, but note that a plain cylinder does not hold position if air pressure drops or the valve centres; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–65 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S FAQ

At 0.7 MPa the push increases to 2182.1 N and the pull to 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.

Turning the M16x1.5 R screw shortens the extend stroke by up to 20 mm, yielding a usable extend range of 45 to 65 mm without changing parts. The S suffix denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches for position feedback.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X65-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.