
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X65-30SB is a compact double-acting double-rod cylinder engineered with an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the outward stroke down by up to 30 mm directly on the machine, yielding a usable extend range of 35 to 65 mm without swapping shims or parts.
This thin riveted-body design saves critical axial mounting depth where a larger profile cylinder cannot fit. It includes a built-in piston magnet for AirTAC reed or electronic switches and features a male-thread M18x1.5 piston rod for secure external mounting. End shock is managed by a fixed NBR bumper that decelerates the stroke end, meaning it is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 65 mm via the R screw to accommodate varied part lengths during production line changeovers without machining new spacers.
Fine-tune the downward pressing depth on carton sealing heads on-site, letting the fixed NBR bumper absorb the end shock while the magnet confirms position.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning within the 35 to 65 mm extend window. It carries the -S magnet for position sensing and the -B male M18x1.5 rod end. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external R (M16x1.5) screw shortens the maximum 65 mm extend stroke down to a minimum of 35 mm without altering the force. The included -S magnet works with AirTAC reed or electronic solid-state switches to confirm end-of-stroke position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.