
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-20S is a double-acting compact cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 50 and 70 mm directly on the machine, eliminating the need for shims or part swaps.
Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper handles end-of-stroke deceleration. The bore-fixed PT1/4 port and 20 mm rod ensure robust pneumatic performance within a 30-500 mm/s speed range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 50-70 mm extend stop to secure varied fixture heights on a single machining center without fabricating custom spacers.
When sizing this 63 mm bore actuator, evaluate both neighboring options. This model is ideal for setups requiring on-site stroke tuning during frequent changeovers.
Remember that a plain cylinder does not hold position if air pressure drops or the valve centers—the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This configuration includes the S magnet for sensing and a female M10x1.5 rod-end thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa, push force is 1558.6 N and pull is 1401.5 N. At 0.7 MPa, push is 2182.1 N and pull is 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stroke by up to 20 mm, yielding a usable 50-70 mm range. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.