
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-20SB is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, technicians can dial the forward stroke down from the 70 mm maximum to 50 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
This thin riveted-body design saves valuable axial mounting depth where larger profile or round-body units will not fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion or a mid-stroke lock. Equipped from the factory with a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M18x1.5), it handles operating pressures up to 1.0 MPa within a -20 to +70 C environment.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly adjust the extend endpoint across a 20 mm window during production line format changes, using the M16x1.5 stop screw to set new rejection or pushing positions on the fly.
When sizing this 63 mm bore actuator, evaluate your force requirements against its neighbours.
Select this specific configuration if your fixture requires on-site extend tuning between 50 and 70 mm, a PT1/4 air port, a male M18x1.5 rod end, and position sensing. Remember that a plain compact cylinder cannot hold a load if air pressure drops or the valve centres; the piston will drift and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore double-acting cylinder uses a PT1/4 air port.
The SB suffix means it has a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 rod thread. The R (M16x1.5) adjuster screw mechanically shortens the extend stop from 70 mm down to 50 mm; it sets the end position without changing the force and does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.