
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-50S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down on-site, providing a usable extend range of 20-70 mm without swapping shims or parts.
This thin riveted-body design saves axial mounting depth where larger profile cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Equipped with a built-in piston magnet, this model supports AirTAC reed or electronic switches for precise end-position detection.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 70 mm during changeovers to position a 79.4 kg vertical lift tool precisely without reprogramming motion controllers.
Fine-tune the outward reach via the M16x1.5 screw during initial jig commissioning to find the perfect pressing depth before locking the setup.
This 63 mm bore is ideal if the 50 mm falls short on thrust but you want to avoid the bulk of an 80 mm body.
Operators needing frequent on-machine stroke tuning between 20 and 70 mm will benefit from the external R thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 70 mm max stroke, 50 mm window, PT1/4 port, built-in magnet, and female M10x1.5 rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
The M16x1.5 adjuster screw shortens the extend end-position by up to 50 mm, yielding a usable outward range of 20-70 mm while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.