
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-10SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 65 and 75 mm without changing parts.
This variant includes a male M18x1.5 piston rod and a built-in magnet for position sensing. The short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which slows the piston near the end but does not function as an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 65 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 65-75 mm extend stop during tooling changeovers to clamp raw castings securely without machining custom spacers.
Lift payloads up to 79.4 kg safely, tweaking the male M18x1.5 rod extension to set precise downward pressing depths.
Stepping down, the SDAJ50 provides 981.7 N, whereas stepping up to the SDAJ80 yields 2513.3 N. This model is ideal for setups requiring precise trial positioning during changeover, as the M16x1.5 screw provides a 10 mm tuning window.
Confirm the 63 mm bore, 75 mm maximum stroke, 10 mm adjustment window, and PT1/4 port match your pneumatic layout. The -S code adds a piston magnet compatible with AirTAC reed or electronic switches, while the -B code specifies the male M18x1.5 rod end. Remember that a standard compact cylinder drifts when air is lost or a valve centres; the fixed bumper only decelerates the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore double-acting cylinder uses a PT1/4 air port.
The M16x1.5 external screw mechanically limits the extend stroke between 65 and 75 mm without altering the output force. The included -S magnet allows tracking of piston position using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.