
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-40SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-40SB is a compact double-acting double-rod cylinder built for applications requiring a precise extend endpoint. An external M16x1.5 adjuster screw lets you dial the forward stroke down from the 75 mm maximum to as low as 35 mm directly at the machine.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, plus a male M18x1.5 threaded rod end for secure external mounting. The short riveted body saves valuable axial depth where space is tight, while a fixed NBR bumper decelerates the piston near the end of travel. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod endpoint on-site to accommodate varying box heights during format changeovers on high-speed packaging lines.
When sizing this 63 mm bore actuator, evaluate your force needs carefully against neighboring options. Choose the SDAJ63X75-40SB specifically when your setup requires frequent on-machine stroke tuning between 35 and 75 mm without changing hardware.
Confirm the 75 mm maximum stroke, 40 mm adjustment window, and PT1/4 air port match your pneumatic layout. This variant features the -S magnet for position sensing and the -B male M18x1.5 piston rod. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 external screw shortens the extend endpoint by up to 40 mm, giving a usable forward range of 35 to 75 mm without shims. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.