
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-50SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down by up to 50 mm directly on the machine, yielding a usable extend range of 25 to 75 mm without swapping shims or parts. Retract remains at the full distance. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit.
This specific build includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M18x1.5) for secure tooling attachment. End shock is handled by a fixed NBR bumper that decelerates the stroke end, but it is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25 to 75 mm forward stop via the M16x1.5 screw to clamp parts of varying heights without manufacturing custom tooling offsets.
Choose this model if your fixture requires frequent on-machine stroke tuning between 25 and 75 mm during changeovers.
Confirm your requirements for a 63 mm bore, 75 mm maximum stroke, and a 50 mm adjustment window. This unit uses a PT1/4 air port, a male M18x1.5 rod thread, and a built-in magnet for solid-state or reed sensing. Note that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 50 mm, allowing you to set the stop anywhere between 25 and 75 mm without changing parts. The included -S magnet enables position feedback using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.