
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50SBH is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-50SBH is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile bodies fail to fit. An external R (M16x1.5) adjuster screw lets you dial the extend stop directly on the machine between 25 and 75 mm without swapping shims or parts.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches, a male-thread piston rod (-B, M18x1.5) for secure external mounting, and high-temperature fluororubber (-H) seals for enhanced oil and heat resistance. Deceleration at the stroke ends relies on a fixed NBR bumper, which absorbs end shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50SBH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Leverage the FKM seals and male M18x1.5 rod to precisely set a sealing jaw extension near warm environments, making trial positioning adjustments directly on the machine.
Choose this model if your fixture requires on-site extend tuning between 25 and 75 mm to accommodate varied part heights.
Confirm the 63 mm bore, 75 mm maximum stroke, 50 mm adjustment window, and PT1/4 port match your pneumatic layout. The male M18x1.5 rod thread and FKM seals suit higher-temperature environments and rigid tooling attachments. Remember that a plain compact cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the R (M16x1.5) screw shortens the extend stroke by up to 50 mm, giving a usable extend range of 25 to 75 mm; retract remains full. The -S option provides a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.