
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 70 to 80 mm directly on your equipment. The short riveted body minimizes axial mounting depth where space is tight.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches and relies on a fixed NBR bumper to decelerate the stroke end. Operating pressure spans 0.15 to 1.0 MPa across a 30-500 mm/s speed range, providing robust performance without the bulk of larger profile formats.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 70-80 mm extend position for pressing bearings, using the M16x1.5 screw to compensate for material thickness variations without reprogramming the motion controller.
Fine-tune the mechanical end position during metal bending setups, relying on the fixed NBR bumper to absorb the 30-500 mm/s stroke impact while the screw locks the exact forming depth.
Choose this specific model if your fixture requires frequent trial positioning or changeover within that 70-80 mm extend window. Remember that a plain cylinder drifts when air is lost or a valve centers—the fixed bumper only decelerates near the end and the adjuster acts as a mechanical stop, so add an external rod lock or pilot-operated check valve for true load holding. This configuration includes the S magnet and a female M10x1.5 rod-end thread with a PT1/4 port.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder has a PT1/4 air port.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 10 mm, yielding a usable 70-80 mm range while retract remains full. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.