
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-20SB is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches, while the male M18x1.5 piston rod thread provides a robust attachment point. Its short riveted body minimizes axial footprint, fitting where larger profile cylinders cannot.
An external M16x1.5 adjuster screw lets you dial the extend stop directly on the machine from 60 to 80 mm without changing parts. End shock is managed by a fixed NBR bumper that decelerates the stroke end, though it is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 60-80 mm extend stop to seat raw castings precisely against a locator pin during CNC changeovers without machining custom spacers.
Set exact upper travel for a 79.4 kg lift fixture, using the mechanical stop to define the dwell position while supplying 0.5 MPa air pressure.
Choose this specific unit when your fixture requires on-machine stroke tuning across a 20 mm window.
Confirm the 63 mm bore, 80 mm maximum stroke, 20 mm adjustability, PT1/4 port, male M18x1.5 rod thread, and integrated magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The M16x1.5 screw mechanically shortens the extend end position from 80 mm down to 60 mm. The built-in magnet works with AirTAC reed or electronic switches to confirm end-of-travel, but the screw itself is a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.