
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-30S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-30S is a double-acting compact cylinder featuring an external R (M16x1.5) adjustment screw that lets you dial the extend stop anywhere between 50 and 80 mm directly on the machine.
Its short riveted body drastically reduces axial mounting depth compared to conventional round-body alternatives, fitting into tight machine frames. The unit includes a fixed NBR bumper to decelerate the stroke end and carries the -S option, meaning a built-in piston magnet is ready for AirTAC reed or electronic solid-state switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Accommodate different box heights on the fly by turning the R screw, using the built-in magnet to confirm the folding arm position before the cycle starts.
Set precise vertical lift limits for material handling trays; the fixed NBR bumper absorbs the end shock while the mechanical stop maintains repeatability.
Choose this 50-80 mm adjustable model for lines requiring frequent changeovers or trial positioning. Confirm your setup needs an M10x1.5 female rod-end thread, a PT1/4 air port, and the -S magnet for sensing. Note that a plain cylinder does not hold position on air loss or valve centering; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 30 mm, allowing on-site tuning between 50 and 80 mm without changing parts. The -S option includes a piston magnet for AirTAC reed or electronic switches, while the fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.