
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-30SB is a double-acting compact cylinder featuring an external M16x1.5 R adjuster screw, allowing you to dial the extend stop precisely between 50 and 80 mm directly on the machine. The short riveted body drastically saves axial mounting depth where larger profile or round-body units fail to fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 threaded rod end. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 50 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 80 mm during product family changeovers to accommodate varying fixture depths without swapping cylinders.
Choose this 63 mm bore when your application demands that specific force bracket.
This unit is ideal for setups requiring frequent on-site stroke tuning without part changes. Confirm your requirements for a 63 mm bore, 80 mm maximum stroke, 30 mm adjustment window, PT1/4 port, male M18x1.5 rod thread, and the -S magnet. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, utilize an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The M16x1.5 R screw shortens the extend end position by up to 30 mm, yielding a usable 50-80 mm stroke while retract remains full. The -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.