
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-75SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-75SB is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 5 to 80 mm directly on your machine. The short riveted body minimizes axial mounting depth where a longer round-body or profile unit will not fit.
This specific configuration includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M18x1.5 piston rod thread (-B). End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s, and the PT1/4 port matches the 63 mm bore specification.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 5 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 5 to 80 mm extend stop during machine changeovers to accommodate varying part heights, avoiding the need to manufacture custom spacers.
Set the exact extend position during prototype runs by turning the M16x1.5 adjuster, locking the mechanical stop once the optimal 5 to 80 mm reach is found.
Choose this model if your fixture requires frequent on-site stroke tuning or changeovers without swapping shims. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your 63 mm bore, 80 mm max stroke, 75 mm window, PT1/4 port, -S magnet, and male M18x1.5 rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external R (M16x1.5) screw shortens the extend stroke by up to 75 mm, yielding a usable 5 to 80 mm range without changing parts. The -S option adds a piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.