
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-10SB is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile or round-body units fail to fit.
Equipped with a male M18x1.5 piston rod and a built-in magnet for AirTAC reed or electronic switches, it allows on-site extend stroke tuning. Turning the external R (M16x1.5) adjustment screw lets you dial the extend stop anywhere between 75 and 85 mm without shims or part changes. The fixed NBR bumpers decelerate the piston near the end of travel, but note this is a mechanical stop, not a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 75-85 mm extend stop on the fly during product changeovers to accommodate varying part heights without swapping mechanical spacers.
Adjust the male M18x1.5 rod endpoint precisely to fold different carton sizes, relying on the fixed NBR bumper to absorb the end-of-stroke shock.
This specific configuration includes the -S magnet for position sensing and the -B male M18x1.5 rod thread. It is ideal for setups requiring frequent changeovers or trial positioning. Remember that a plain compact cylinder does not hold its load if air pressure is lost or the valve is centered; for load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The adjustment screw sets the stop position and does not alter these force values.
The R (M16x1.5) adjuster screw shortens the extend stroke by up to 10 mm, allowing you to set the endpoint anywhere between 75 and 85 mm directly on the machine. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body sensor grooves for precise position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.