
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-40SB is a double-acting compact cylinder featuring a male-thread piston rod and an on-site adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. Turning the external M16x1.5 adjuster screw lets you dial the extend end-position anywhere between 45 and 85 mm without changing parts.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT1/4 air port supplies the 20 mm piston rod for rigorous positioning tasks.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend endpoint on-site to accommodate different box heights without swapping hardware, relying on the fixed NBR bumper to absorb the stop impact.
When sizing this 63 mm bore actuator, evaluate your force requirements against its neighbours.
Choose this specific configuration when your machine commissioning requires frequent extend-length tuning between 45 and 85 mm. Confirm your setup needs the male M18x1.5 rod thread and the integrated magnet. Remember that a standard cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external M16x1.5 screw shortens the extend stroke by up to 40 mm, yielding a usable 45-85 mm range while retract remains full. The built-in magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.