
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-50SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-50SB is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 35 to 85 mm directly on your machine.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 threaded rod end. The short riveted body drastically reduces axial mounting depth compared to conventional round-body designs, while the fixed NBR bumper decelerates the piston at the stroke extremes without acting as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 85 mm during fixture changeovers to accommodate varying part widths without machining new spacers.
Adjust the male M18x1.5 rod extension on the fly to reposition diverter gates for different package sizes on a packaging line.
Choose this adjustable model if your fixture changeovers require frequent trial positioning or on-site stroke tuning without swapping shims. Confirm your spec needs a PT1/4 port, a 50 mm adjustment window, the -S magnet, and the -B male rod. Remember that a plain cylinder drifts when air is lost or the valve centers; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 318 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, yielding a usable range of 35 to 85 mm. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.