
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-75SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-75SB is a compact double-acting double-rod cylinder built for applications requiring a variable extend endpoint. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches, while the male M18x1.5 piston rod thread provides a robust mounting interface. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
Turning the external R (M16x1.5) adjuster screw lets you dial the extend stop down by up to 75 mm, yielding a usable extend range of 10 to 85 mm directly on the machine. A fixed NBR bumper decelerates the stroke end, but note this is a bumper, not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 85 mm to clamp raw castings of varying widths on a machining line without fabricating custom spacer plates.
Set a precise upper stop for a 79.4 kg vertical lift fixture, using the external R screw to trial positions before locking down the final elevation.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 10 to 85 mm extend window.
Confirm the 63 mm bore, 85 mm maximum stroke, 75 mm adjuster window, and PT1/4 port match your pneumatic supply. This unit includes the -S magnet for sensing and the -B male M18x1.5 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The R (M16x1.5) screw mechanically shortens the extend endpoint from the 85 mm maximum down to 10 mm without changing the output force. The included -S magnet works with AirTAC reed or electronic solid-state switches to detect the piston position along the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.