
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-20S is a compact double-acting double-rod cylinder built for tight axial footprints. Its short riveted body saves mounting depth where larger profile bodies cannot fit. A built-in piston magnet enables position feedback via AirTAC reed or electronic switches. The unit operates reliably across a 30-500 mm/s speed range.
An external M16x1.5 adjuster screw lets you dial the extend stop directly on the machine between 70 and 90 mm without changing parts. A fixed NBR bumper decelerates the stroke end, handling impact without requiring adjustable air cushions.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 90 mm during tooling changeovers to perfectly seat parts without reprogramming motion controllers.
Adjust the extend position on the line to accommodate varying package depths, relying on the fixed NBR bumper to absorb end-of-stroke shock.
This makes the model ideal for medium-duty handling tasks.
On-machine stroke tuning is essential for setups requiring frequent changeovers or trial positioning. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston drifts, and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm stroke, 20 mm window, PT1/4 port, built-in magnet (S), and female M10x1.5 rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
Turning the M16x1.5 external screw shortens the extend end-position by up to 20 mm, yielding a usable 70-90 mm range while maintaining full retract. The included magnet (-S) works with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.