
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-20SB is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the outward stroke anywhere between 70 and 90 mm directly on your machine, avoiding part swaps or shims during changeovers.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, plus a male-thread piston rod (-B, M18x1.5) for secure tool mounting. The short riveted body significantly reduces axial mounting depth compared to round-body alternatives, fitting into tighter machinery frames. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly adjust the outward stroke on-site for different package sizes, relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500 mm/s.
When sizing this unit, look both directions for your thrust requirements. Choose this 63 mm bore if your application demands that intermediate power band along with on-site stroke tuning.
This configuration is ideal for operators who need frequent trial positioning or setup adjustments without swapping hardware. Confirm the bore (63 mm), full stroke (90 mm), adjustment window (20 mm), and PT1/4 port match your pneumatic layout. Note that a plain cylinder does not hold a load if air pressure drops or the valve is centred; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This model includes the -S magnet and the -B male M18x1.5 rod end.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The external M16x1.5 screw lets you shorten the extend stroke from the 90 mm maximum down to 70 mm on the machine, without affecting force. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.