
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-30SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-30SB is a compact double-acting double-rod cylinder built for on-site stroke tuning. Its external M16x1.5 adjuster screw lets you dial the extend stop anywhere between 60 and 90 mm, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and features a male M18x1.5 threaded rod end. The short riveted body minimizes axial mounting depth in tight machinery, while a fixed NBR bumper decelerates the piston at the stroke ends. Note that the bumper absorbs end-shock but does not function as a mid-stroke lock or an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod endpoint on-site to match different box depths, ensuring precise flap positioning during high-speed 30-500 mm/s packaging cycles.
When sizing this 63 mm bore actuator, evaluate your force requirements both ways.
Choose this specific configuration when you need exact extend positioning between 60 and 90 mm without swapping parts. It carries the -S magnet for position sensing and the -B male M18x1.5 rod thread. Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centers; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Operating speed spans 30-500 mm/s.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the M16x1.5 screw shortens the extend stroke within a 60 to 90 mm range without changing the force. The built-in -S magnet enables positioning feedback using either AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.