
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-40S is a double-acting compact cylinder featuring a 63mm bore and an external R (M16x1.5) adjustment screw. Turning this screw lets you dial the extend end-position anywhere between 50 and 90mm directly on the machine, eliminating the need for shims or part swaps. Retract remains a full stroke, while the short riveted body conserves valuable axial mounting depth where larger profile cylinders cannot fit.
This specific build includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-travel energy is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 50 and 90mm to accommodate varying raw casting thicknesses on a fixture without machining custom spacer rings.
Rapidly reposition the extend endpoint during product family changeovers on a packaging line, relying on the -S magnet to confirm the new setpoint.
Choose this 63mm option when the 50mm bore lacks thrust or the 80mm variant is physically too large.
This model is ideal for setups requiring frequent on-machine stroke tuning during changeovers. Confirm your parameters: 63mm bore, 90mm max stroke, 40mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold position if air pressure drops or the valve centers; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318kgf at 1.0MPa.
The M16x1.5 R screw mechanically shortens the extend stroke from the 90mm maximum down to 50mm without changing the output force. The -S option adds a piston magnet compatible with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.