
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-50 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-50 is a compact double-acting double-rod cylinder engineered for applications requiring a variable extend end-position. An external M16x1.5 adjuster screw allows you to dial the forward stop anywhere between 40 and 90 mm directly on the machine, eliminating the need for shims or part swaps. Retract remains at the full stroke length.
The short riveted body conserves valuable axial mounting depth where a larger profile cylinder would fail to fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 90 mm to perfectly seat varying raw casting widths against a fixed stop without machining custom spacers.
Adjust the mechanical stop on-site to accommodate different box depths on a packaging line, ensuring precise flap alignment during rapid changeovers.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 40-90 mm extend window.
Confirm your requirements for the PT1/4 port, the 20 mm piston rod, and the female M10x1.5 rod-end thread. Note that this base SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. A plain pneumatic cylinder does not hold position or load when air is lost or the valve is centred—the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external M16x1.5 screw shortens the extend stroke by up to 50 mm, allowing the rod to stop anywhere between 40 and 90 mm while retract remains full. This SKU has no piston magnet and cannot take a switch; you must specify the -S option to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.