
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-50S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M16x1.5) screw lets you dial the outward stroke down on-site from 90 mm to 40 mm without swapping shims or parts.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 40 to 90 mm during prototype runs to find the exact push depth for new workholding fixtures without machining new spacers.
This makes the 63 mm an ideal middle ground for medium-force changeover tasks. The 50 mm adjustment window is perfect for trial positioning on setup-heavy lines.
Confirm the 63 mm bore, 90 mm max stroke, 50 mm window, and PT1/4 port suit your pneumatic layout. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Operating speed spans 30-500 mm/s.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.5 MPa this cylinder pushes 1558.6 N and pulls 1401.5 N. At 0.7 MPa it pushes 2182.1 N and pulls 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 adjuster screw mechanically shortens the extend stop from 90 mm down to 40 mm; it does not alter force or lock mid-stroke. The built-in -S magnet enables tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.