
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-75S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-75S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down on the machine, yielding a usable extension range of 15 to 90 mm without swapping shims or parts.
The short riveted body minimizes axial mounting depth where space is tight, while a built-in piston magnet (-S) supports position sensing with AirTAC reed or electronic switches. End-of-travel shock is managed by a fixed NBR bumper that decelerates the piston near the end of the stroke; it is not an adjustable air cushion. Note that this mechanical stop is not a mid-stroke lock, so the cylinder will not hold a load if air pressure is lost.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up packaging line transitions by turning the M16x1.5 screw to set new extend endpoints, accommodating different carton sizes rapidly.
When sizing this 63 mm bore, evaluate both neighboring options.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 15 and 90 mm during changeovers. It features a PT1/4 port, a 20 mm piston rod, and the -S magnet for switch mounting. For any application requiring the rod to stay put during a pneumatic power loss, you must add an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates at the extremes and provides no holding force.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external M16x1.5 screw shortens the extend stroke by up to 75 mm, allowing on-machine tuning between 15 and 90 mm. The -S option includes a built-in piston magnet for use with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.