verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke100 mm
  • Adjustable range90–100 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$151.18 $158.68Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10

The AirTAC SDAJ80X100-10 is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the extend stroke down by up to 10 mm, yielding a usable range of 90 to 100 mm directly on the machine.

Its short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10 Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke100 mm
Adjustable range90 – 100 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×100Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10 Is Used

conveyor_belt

Heavy Pallet Diverter

Reroute heavy pallets on a packaging line where the short riveted body fits tight axial spaces, using the fixed NBR bumper to absorb the impact of high-mass lateral stops.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10 the Right Cylinder?

This 80 mm bore is optimal when the smaller unit lacks thrust or the larger one exceeds your spatial limits.

Choose this model for heavy setups requiring precise 90 to 100 mm extend tuning during changeovers. Confirm the PT3/8 port, the female M14x1.5 rod-end thread, and the 10 mm adjustment window. A plain SDAJ does not hold a load if air pressure drops or the valve centers; the piston drifts and the bumper only decelerates near the end. For suspended loads, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10 FAQ

At 0.7 MPa, push increases to 3518.6 N. The theoretical maximum push is 513 kgf at 1.0 MPa.

Turning the external R (M20x1.5) screw mechanically shortens the extend endpoint from the 100 mm maximum down to 90 mm. It does not alter the output force. The cylinder cannot hold a load on air loss; you must add an external rod lock or pilot-operated check valve for secure positioning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ80X100-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.