
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-100S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-100S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M20x1.5) screw, you can dial the extend position anywhere between 0 and 100 mm directly on the machine.
Its short riveted body saves valuable axial mounting depth where a longer round-body or profile cylinder would fail to fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end, meaning it is not an adjustable air cushion. Equipped with a built-in magnet (-S), this model supports AirTAC reed or electronic solid-state switches for precise end-position sensing.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 0 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rely on the compact riveted body to save axial depth in tight machinery cells while adjusting the extend position to seat different component batches accurately.
Choose this specific configuration if your application requires frequent on-machine stroke tuning across the full 0 to 100 mm window. Confirm the PT3/8 port, the 25 mm piston rod, and the female M14x1.5 rod-end thread suit your mounting hardware. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the stroke end. For a securely held load without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The adjustment screw sets the stop position and does not alter these force values.
The R (M20x1.5) screw shortens the extend stroke by up to 100 mm, giving a usable extend range of 0 to 100 mm. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing, while a fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.