
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-10S is a compact double-acting double-rod cylinder engineered with an external extend stop. An M20x1.5 adjuster screw lets you dial the outward stroke on the machine between 90 and 100 mm, eliminating the need for shims or part swaps during commissioning.
This model features a short riveted body that conserves axial mounting depth in tight spaces. It relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for position sensing, while the 25 mm rod handles substantial loads.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 90 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuator endpoint during product changeover, ensuring the 25 mm rod pushes heavy pallets accurately at operating speeds up to 500 mm/s.
Choose this specific unit if your setup requires fine-tuning the extend position within the 90-100 mm window. It features a PT3/8 port, a female M14x1.5 rod-end thread, and the -S magnet option.
Remember that a standard compact cylinder does not hold position upon air loss or valve centering; the piston drifts. The fixed NBR bumper only decelerates near the stroke end and the external screw is a mechanical stop, not a mid-stroke lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 3518.6 N and pull to 3175 N. The theoretical maximum push is 513 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa.
The M20x1.5 screw shortens the extend stroke by up to 10 mm, allowing an on-machine range of 90-100 mm. The included -S magnet works with AirTAC reed or electronic switches for position feedback, while the fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.