
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-30 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M20x1.5 screw lets you dial the outward stroke down from the 100 mm maximum to 70 mm directly on the machine, avoiding part swaps during changeovers.
This 80 mm bore unit utilizes a short riveted body to minimize axial mounting depth where a larger profile cylinder will not fit. It handles speeds of 30-500 mm/s and relies on a fixed NBR bumper at each end to decelerate the piston near the stroke limits. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the outward stroke on the fly during format changeovers to handle varying box sizes on a tight-footprint riveted body.
Choose this 80 mm bore if your setup requires that intermediate force threshold.
This cylinder is ideal for lines requiring frequent on-site stroke tuning between 70 and 100 mm. Confirm your installation parameters: 80 mm bore, 100 mm max stroke, 30 mm window, PT3/8 air port, female M14x1.5 rod thread, and no magnet. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
Turning the external R (M20x1.5) screw shortens the extend stop from the 100 mm maximum down to 70 mm. It sets the mechanical stop position and does not alter the force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.