
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-30S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-30S is a double-acting, double-rod compact cylinder featuring an external extend stop. Turning the M20x1.5 adjuster screw lets you dial the outward stroke anywhere between 70 and 100 mm directly on the machine, avoiding part swaps during changeovers.
Its riveted body design drastically cuts axial mounting depth, fitting where larger profile cylinders cannot. The 80 mm bore uses a PT3/8 port and a 25 mm rod to handle heavy loads, while a fixed NBR bumper absorbs end-of-stroke shock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Raise payloads up to a safe 128.1 kg working load, adjusting the stop depth on the fly while relying on external check valves for load holding.
Quickly reconfigure the outward stroke on automated lines handling varied part sizes, using the M20x1.5 screw for rapid commissioning.
Choose the 80 mm variant when your fixture requires substantial push force within a tight footprint. It is ideal for setups needing frequent on-site stroke tuning across the 70-100 mm window.
Remember that the fixed NBR bumper only decelerates the stroke end; it does not hold the load if air pressure drops or the valve centers. For gravity-loaded vertical applications, integrate an external rod lock or pilot-operated check valve. This specific configuration includes the S magnet for AirTAC reed or electronic switches and uses a female M14x1.5 rod-end thread.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 screw mechanically shortens the extend stop from the 100 mm maximum down to 70 mm without changing the output force. The included S magnet enables tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.