
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-40S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-40S is a compact double-acting double-rod cylinder engineered for on-site stroke tuning. An external M20x1.5 adjuster screw lets you dial the extend stop anywhere from 60 to 100 mm without swapping parts.
Its short riveted body drastically cuts axial mounting depth where larger profile or round-body units fail to fit. The piston features a built-in magnet for position sensing, while a fixed NBR bumper decelerates the stroke ends. Note that this bumper is not an adjustable air cushion, and the adjuster acts purely as a mechanical stop rather than a mid-stroke lock.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 60 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on the fly for varying package sizes on a packaging line, relying on the fixed NBR bumper to absorb the kinetic energy of each cycle.
Stepping down to the SDAJ63 yields 1558.6 N, whereas scaling up to the SDAJ100 provides 3927 N.
Operators needing frequent changeover or trial positioning benefit most from the 40 mm adjustment window. Confirm your requirements for the PT3/8 port, the male M22x1.5 rod thread, and the installed magnet for reed or electronic switches. Remember that a standard cylinder drifts if air pressure is lost; utilize an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
This 80 mm bore cylinder uses a PT3/8 air port.
The M20x1.5 external screw shortens the extend end position by up to 40 mm, giving a usable 60 to 100 mm range without altering the output force. The included -S magnet allows tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.