
The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75 is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ80X100-75 is a double-acting compact cylinder featuring an external M20x1.5 adjuster screw that dials the extend stop anywhere between 25 and 100 mm directly on your machine. A fixed NBR bumper decelerates the stroke end, and the short riveted body saves axial mounting depth where round-body or profile cylinders cannot fit.
This 80 mm bore unit uses a PT3/8 air port and a 25 mm piston rod to handle substantial loads. It operates between 0.15 and 1.0 MPa, yielding a theoretical maximum push of 513 kgf. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X100-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 100 mm |
| Adjustable range | 25 – 100 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25 to 100 mm extend stop during press tooling changeovers to apply precise 2513.3 N clamping force without swapping shims.
Adjust the stroke on the fly to accommodate varying pallet widths on a packaging line, leveraging the 513 kgf maximum push for heavy goods.
Choose this cylinder if your application requires frequent on-site stroke tuning across a 75 mm adjustment window without part changes. Confirm the 80 mm bore, 100 mm maximum stroke, 75 mm window, PT3/8 port, female rod thread, and the absence of a magnet. Remember that a plain cylinder does not hold its load on air loss or valve centring; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj80-adjustable-cylinder
Quick checklist
The M20x1.5 adjuster screw mechanically shortens the extend stop from the 100 mm maximum down to 25 mm without changing the force. It is not a mid-stroke lock; the fixed NBR bumper only decelerates the stroke end, and the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.